背景: #EDF0F5 #FAFBE6 #FFF2E2 #FDE6E0 #F3FFE1 #DAFAF3 #EAEAEF 默认  
阅读文章

4管发射机原理图

[日期:2007-05-10] 来源:  作者:未知 [字体: ]

Circuit Notes
This circuit provides an FM modulated signal with an output power of around 500mW.  The input


MIC preamp is built  around a couple of 2N3904 transistors, audio gain limited by the 5k preset.
The oscillator is a colpitts stage, Frequency of oscillation governed by the tank circuit made from
two 5pF caPACitors and the inductor.  ( ClICk here for Colpitt Oscillator Resonant Frequency Equation.)
Frequency is around 100MHz with values shown.

  Audio modulation is fed into the tank circuit via the 5p caPACitor, the 10k resistor and 1N4002
controlling the amount of modulation.  The oscillator output is fed into the 3.9uH inductor whICh
will have a high impedance at RF frequencies.

The output stage operates as a class D amplifier , no direct bias is applied but the RF signal developed
across the 3.9uH inductor is suffICient to drive this stage. The EMItter resistor and 1k base resistor
prevent instability and thermal runaway in this stage.
 

Paul K. Sherby
Belleville,
MIChigan.
USA
Website- httpwww.geocities.comEurekaPark5323

阅读:
录入:gddq

推荐 】 【 打印
上一篇:廉价的VMOS管制作大功率射频放大器
下一篇:遥控飞机发射电路原理图
相关文章       发射机 
本文评论       全部评论
发表评论


点评: 字数
姓名:

  • 尊重网上道德,遵守中华人民共和国的各项有关法律法规
  • 承担一切因您的行为而直接或间接导致的民事或刑事法律责任
  • 本站管理人员有权保留或删除其管辖留言中的任意内容
  • 本站有权在网站内转载或引用您的评论
  • 参与本评论即表明您已经阅读并接受上述条款